Rear Recovery Eyelets for the 2021+ Ford Bronco
Give your rear bumper a dependable place to hook a strap or shackle when the trail gets sticky.
Rear Recovery Access Where Your Bumper Has None
Many aftermarket rear bumpers don't include recovery tabs. These bolt-on rear recovery eyelets mount to the factory rear frame locations of your Bronco and give you a solid frame-mounted point to hook onto.
They fit the 2021+ Ford Bronco, 2-door and 4-door, and install without welding or cutting.
|
 |
 |
Built From 1/4-Inch Steel
Each eyelet is a compact steel tab with laser-cut, CNC-bent construction and a textured powder-coat finish that stands up to mud, water and trail debris.
The loop is sized for standard 3/4-inch recovery hardware, so you can connect a D-ring or soft shackle and clip your strap in.
|
Reversible Bolt-On Install
The eyelets bolt to the factory frame locations with the included hardware. Plan on about 30 minutes with basic hand tools, and you can remove them later without leaving a mark on the truck.
Each order includes both the driver and passenger-side eyelets and all required mounting hardware.
|
 |
Before You Order
These eyelets are for Broncos with an aftermarket rear bumper that has no recovery tabs of its own. They do not work with the OEM rear bumper.
Recovery gear such as D-rings, soft shackles and straps is not included. Use rated hardware and follow its working-load limits.
 |
Stays Tucked Under the Frame
The eyelet tab drops just below the bumper and the frame rail, close to the exhaust, so it stays out of the way until you need it.
|
This Part Fits
- 2021+ Ford Bronco, 2-door and 4-door (not the Bronco Sport)
- Mounts to the factory rear frame locations
- For aftermarket rear bumpers without recovery tabs, not for use with the OEM bumper
- Driving a Raptor? Email info@stickerfab.com with your setup before you order
- Turn Offroad part number EA12-M1
Complete the Build
FAQ
Which Broncos does it fit? The 2021+ Ford Bronco, 2-door and 4-door. It is not for the Bronco Sport. If you have a Raptor, email us with your setup first. |
Does it work with the factory rear bumper? No. It is made for aftermarket bumpers that do not include their own recovery tabs. |
Do I need to weld or cut anything? No. The eyelets bolt to the factory rear frame locations and the install is reversible. |
How long does install take? About 30 minutes with basic hand tools. |
What hardware can I connect? The loop is designed for standard 3/4-inch recovery hardware such as D-rings and soft shackles. |
Does it come as a pair? Yes. Each order includes the driver and passenger-side eyelets and all required mounting hardware. |
What are they made of? Laser-cut, CNC-bent 1/4-inch steel with a textured powder-coat finish. |
What is the return policy? Return terms for this product may differ from StickerFab-branded items - see our refund policy or email info@stickerfab.com before you order. |