StickerFab

Standard Smoked Sidemarker Overlays (Front and Rear) - 2021+ Bronco (w/ Halogen Taillights)

  • Sale
  • Regular price £11.00
Shipping calculated at checkout.




Smoked Sidemarker Overlays (Front and Rear)

When you're trying to achieve a certain theme, sidemarkers can stick out like a sore thumb.  There's an easy way to make them less noticeable (light can still pass through at night), without spending a lot of money.  That smoked look is achievable through vinyl.

We provide a variety of materials you can get these in.  Start a theme for your vehicle and mix it with our other vinyl products.

AVAILABLE MATERIALS

  1. Dark Smoke -  Standard dark smoke material.  Made in Germany.
  2. Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.
  3. Light Smoke - Standard dark smoke material.  Made in Germany.
  4. Dark Smoke Stealth - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.
  5. Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.
  6. Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.
  7. Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  A galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.

Instructions

Items you may want to have:

  • Detail Spray (without wax) or glass cleaner
  • Microfiber Towel or Paper Towel
  • Dish with soapy water (few drops of dish soap + 1-2 cups of water)
  • Felt Lined Squeegee(optional)
  • Heat gun or hair dryer (optional)
  •  

    Clean the application area to prepare it for installation.  Do not use a spray with any type of wax in it.

    The overlays are labeled.

     

    A wet installation is optional.  Use slightly soapy water on the back of the vinyl.  This will allow you to move the vinyl around and find the correct alignment.  Once aligned, use your fingers or a felt tip squeegee to push out the water/air.  Allow the vinyl to dry.  Once dry, make sure all the edges are adhering to the sidemarker.  If they are not sticking very well, apply LIGHT heat and press them down again.

    Customer Reviews

    Based on 4 reviews
    75%
    (3)
    25%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    Mitch Vruggink (Baton Rouge, LA, US)
    Great product

    Works excellent!

    M
    Marlin KLOTZ (Houston, TX, US)
    The fronts fit great but the back is lacking.

    The fronts fit great but the back is just a long strip. I ended up trimming it so it did not look like I put a piece of tinted tape around the taillight

    J
    Jon McWright
    Smoked twilight overlays

    These are super easy to install. Love the looks. Waited to submit this review because I wanted to see how they performed. I was worried about them blocking the reverse light and any effect that would have on the view of my reverse camera….no issues at all with that. I included a picture to show they don’t impede the light at all. Great product and I highly recommend!

    S
    Sawyer Fried (Washington, DC, US)
    Great product & even better customer service

    Not only are their products great, but the customer service is superb as well. I accidentally ordered a wrong item, but the StickerFab team noticed it didn’t match the other items in my order and reached out to let me know. They fixed it with no questions asked and were extremely nice and helpful through the process. 10/10 recommend them and their products.