TOYOTA Front Grille Emblem Kit - 2024+ Land Cruiser / 07-14 FJ Cruiser
from$24.99 USD /per
"TOYOTA" 2024+ Land Cruiser Front Grille Emblem Overlays (Also Fits FJ Cruiser)
Don't hide your Toyota pride. Add some new styling and make the front logo a little less subtle and a lot neater. Easy to apply. In order to cover most of the silver OEM emblem, we chose to create acrylic backings for our vinyl. This makes the overall appearance much cleaner!
UPDATE: You can actually remove the factory silver emblems entirely and use this kit to restore the logo. Please see the video at the very bottom of this page.
*NOTE Gloss black does not come with vinyl because the acrylic is already gloss black Matte black would have a small gloss border due to the glossy acrylic backing.
Features
Cut from US supplied vinyl
Higher cost items are printed and laminated for UV protection
Able to withstand years of exposure to harsh weather
Made in the USA
Installation
Recommended Items:
Quick detailer without wax (for cleaning the application area)
Ideal install temperature is 75-85 degrees. If it is warm, do the install in the shade. Vice versa if it is cooler. Clean the surface of the factory letters.
First remove the protective paper from the top of the acrylic pieces. There is a protective 3M adhesive paper on the bottom side that will be removed later.
Spray the surface again with StickerFab application fluid and do the same to the overlay as you peel it off the backing paper. This fluid will let you align the material perfectly and prevent it from sticking to itself. Once you get a proper alignment, you can squeegee out the fluid and bubbles.
Test fit each letter and then remove the backing paper. Re-align the piece on top of the OEM letter and make sure there is an even gap around the outer edge. The acrylic pieces are larger than the OEM emblem to cover up the silver. Once properly aligned, press down firmly. Repeat until all of the letters are complete.
Update Video: It is possible to remove the stock silver emblems entirely!
Notice of Non-Affiliation and Disclaimer:
StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Toyota, or any of its subsidiaries or its affiliates.
The name Prado as well as related names, marks, emblems and images are registered trademarks of their respective owners, including Toyota.
These went on super easy and look phenomenal! The only thing I wish is that the sticky side has a lip around the outside edges of the letter to help guide the fitment. If it was possible it would make installation easier and it would have the added benefit of covering the remaining exposed grey sides of the toyota emblem on the grill. Either way, great product, easy installation. Airborne All The Way!
One or more of the items in your cart is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.