Type "S" Inlay for Shifter Trim Overlays
Almost every S on this vehicle has color except the S under the shifter. Fix that quickly, easily, and without breaking the bank AT ALL.
Comes with 4 sets (3 free replacements).
Ideal weather is 75-85 degrees. If it's really warm, do it in the shade!
Clean the application and surrounding areas prior to applying. We recommend the following items for installation:
- Detailing Spray
- Soapy Water (StickerFab Application Fluid recommended)
- Small screwdriver or toothpick
Make sure there is no Armor All or anything similar on the shifter trim. You can wet the back of the vinyl with a few drops of dish soap in a cup of water. This allows you to slide the vinyl around into the right position. You can also place the vinyl on the tip of a small screwdriver or toothpick. Once you have found that position, use your fingers to push out the soapy water. Allow to dry. LOW heat can be used to dry out the vinyl quicker.
Sticker was good quality, but is a little smaller then the indented space.
Adding the red S to the shift plate adds a nice touch.
The sticker makes the S stand out. Perfect