- 100% printed and customizable
- Made in the USA
- Orafol vinyl with Orafol clear over-laminate for UV protection
- NOTE: On car photos are of our original version until we take new ones
V2 Printed Series STI Wing End Overlays
So what's the difference between these and our original? The original had a cut out which gets filled in color wise by your OEM paint color. The V2 are fully printed and then an over-laminate is applied to ensure long life. It gives it an ultra gloss or matte (stealth) finish.
You can to choose the background color AND the logo color. You can also request custom backgrounds like camo or whatever!
NOTE: Please be sure to let us know what text you want inside the center. You can choose STI, 2015+ WRX, or classic WRX (italic). For the 2022 WRX, you must have an OE style 15-21 STI spoiler. Also for the 2022, if your wing is angled down and not straight, you may not want to choose a logo as it will be at an angle also.
This material is durable and will last for years. We source the vinyl for these products from US suppliers.
Installation is easy if you use StickerFab Application Fluid.
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
- Military Themed
- Other organizations
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
This product installs the same as your wing overlay. Just a different vehicle and different location.
- Quick detailer without wax (for cleaning the application area)
- StickerFab Application Fluid or Soapy Water (1 drop dish soap per cup of water)
- Felt Tip Squeegee
3 item kit (microfiber, installation fluid, squeegee)
Ideal install temperature is 75-85 degrees. If it is warm, do the install in the shade. Vice versa if it is cooler. Clean the surface of the wing ends. Spray the surface again with StickerFab application fluid and do the same to the wing end as you peel it off the backing paper. This fluid will let you align the material perfectly and prevent it from sticking to itself. Once you get a proper alignment, you can squeegee out the fluid and bubbles.