The 2024 Toyota Tacoma brought a significant redesign, and one of the most noticeable changes is the new front end - including repositioned fog lights that sit differently than the outgoing 3rd gen. If you're looking to customize your 2024+ Tacoma's fog lights with overlays, this guide covers everything: what fits, what doesn't, and how to install.

Fitment Notice: These overlays fit the 2024+ Toyota Tacoma on most trims. They do NOT fit the TRD Pro or Trailhunter, which feature a different front bumper and fog light configuration. Confirm your trim before ordering.

What Changed on the 2024 Tacoma's Front End

The 4th gen Tacoma (2024+) moved away from the 3rd gen's more traditional fog light placement. The new front bumper has a distinct design with fog light positions that require specifically-designed overlays - you can't use the old gen overlays and expect a clean fit. If you're still on a 2016-2023 Tacoma, those overlays are available separately in our 2016-2023 Tacoma fog light overlays listing.

For 2024+ owners, our 2024 Tacoma Fog Light Overlays are cut specifically for the new bumper shape. Clean lines, proper alignment, no trimming required.

Why Tacoma Owners Overlay Their Fog Lights

There are a few common reasons Tacoma owners reach for fog light overlays:

• Blackout build: Tinting the fog light housing is one of the cleanest ways to eliminate the stock chrome and plastic look.
• Match window tint: A light smoke overlay on the fog housing complements the darker tones of tinted windows for a cohesive exterior look.
• Lens protection: Vinyl overlays add a thin layer of protection against light rock chips and UV exposure on the lens.
• Reversibility: Unlike paint or replacement parts, overlays can be removed cleanly if you want to go back to stock or try a different look.

Overlays vs. Replacing the Fog Lights

Aftermarket fog light replacements for the 2024 Tacoma run $150-250 per side and often require some wiring or bracket work. Overlays are $20-30 total, install in under 20 minutes, and come off clean whenever you need. For most owners doing a blackout or stealth build, overlays deliver 90% of the visual impact at a fraction of the cost and zero installation complexity.

The overlays sit on the fog light lens cleanly, making them look like they were tinted from the factory.

New Gen vs. Old Gen - Know Your Year

This is worth repeating because it causes a lot of confusion: the 2024+ Tacoma and the 2016-2023 Tacoma have completely different front bumpers. Overlays designed for one will NOT fit the other. If you're on a 3rd gen (2016-2023), head over to our 2016-2023 Tacoma fog light overlays page - those are cut specifically for that bumper shape.

For everyone on the 2024+ platform, the 2024 Tacoma Fog Light Overlays are the right fit. Different cut, different shape, designed from scratch for the new gen front end.

How to Install Fog Light Overlays on the 2024 Tacoma

Installation is straightforward.  Any product from StickerFab has installation instructions on the product page.

Frequently Asked Questions

Will these fit TRD Pro or Trailhunter?

No. These overlays do NOT fit the TRD Pro or Trailhunter. Both trims come with a different front bumper and different fog light configuration. These overlays are designed for the standard 2024+ Tacoma front bumper found on SR, SR5, TRD Sport, TRD Off-Road, and Limited trims.

Do these fit the 2016-2023 Tacoma?

No. The 2016-2023 Tacoma has a different front bumper and fog light shape. If you're on the older gen, see our 2016-2023 Tacoma fog light overlays - cut specifically for that bumper.

Are these reversible?

Yes. The vinyl adhesive holds firmly but releases cleanly. Apply gentle heat from a heat gun or hair dryer to soften the adhesive, then peel from one corner. The housing underneath will be undamaged.

Will they affect my fog light aim or inspection?

No. They make the vehicle have a factory tinted lamp look. 

The 2025 Toyota 4Runner came out swinging with a bold redesign, and those prominent front fog lights are one of its most distinctive features. It's no surprise that fog light overlays became one of the first mods to hit the market. If you're looking to tint, smoke, or add a color accent to your fog lights without touching wiring or spending $200+ on replacement housings, overlays are the move.

Fitment Notice: These overlays fit the 2025+ Toyota 4Runner on most trims. They do NOT fit the TRD Pro or Trailhunter, which have a different front fascia with different fog light housing positions. Double-check your trim before ordering.

Why Customize the Fog Lights on the 2025 4Runner?

The new 6th gen 4Runner's front end design puts the fog lights front and center - they're large, prominent, and impossible to miss. That makes them a natural starting point for exterior customization. Whether you're going full blackout build, trying to match your window tint, or just want to tone down the chrome and plastic look, fog light overlays get the job done fast.

Our 2025 4Runner Fog Light Overlays are precision-cut vinyl overlays that sit over the fog light housing. You get the custom look without cutting any wires, pulling any fuses, or voiding anything under the hood.

Overlays vs. Replacement Housings - What's the Difference?

Aftermarket fog light replacements can run $200 or more per side, and most require at least some wiring work. Installation can take hours. Overlays are the opposite: $20-30, peel-and-stick, done in 15 minutes. If you're not happy with the look, you peel them off and you're back to stock. No commitment, no risk, no tools required.

The overlays go on the housing surround - not on the lens itself - so your actual light output is unaffected. You keep full fog light functionality while getting the custom look you're after. For most 4Runner owners building a blacked-out or stealth build, that's the perfect combination.

Color and Finish Options

Fog light overlays for the 2025 4Runner come in multiple finish options - smoke/tint (darkened), yellow, amber, and additional colors depending on current availability. Check the product listing for in-stock variants. Smoke is the most popular choice for blackout builds, while smoked works well if you're matching other exterior trim accents like mirror caps or door handles.

How to Install

Installation takes about 15-20 minutes for both sides.  StickerFab provides instructions for each vinyl product right on the product page.

1. Press firmly around all edges and let cure for a few hours.

No heat gun needed for install. For removal, a heat gun or hair dryer makes the process clean and damage-free. These are made from cast vinyl with a permanent adhesive that holds through weather, car washes, and UV exposure - but still releases cleanly when you need to remove them.

UPDATE:  There are new acrylic over lenses available as well.

Pair It with Other 4Runner Blackout Mods

Fog light overlays look even better when paired with other exterior mods. The 2025 4Runner's front end has a lot of chrome and plastic trim that responds well to a full blackout treatment. Once the fog lights are done, consider the headlight area, mirror caps, and door trim for a cohesive look. Our 4Runner fog light overlays are a solid first step into building the exterior you want.

Frequently Asked Questions

Will these fit the TRD Pro or Trailhunter?

No. These overlays do NOT fit the TRD Pro or Trailhunter. Both trims have a different front fascia with different fog light housing positions. These overlays will not align correctly on those trims. Check your trim level before ordering.

Are these overlays reversible?

Yes. The vinyl adhesive holds firmly but releases cleanly. Use a heat gun or hair dryer to warm the overlay, then peel from one corner. The housing underneath will be undamaged.

How long does installation take?

Most people complete both sides in 15-20 minutes. Clean the surface, peel, align, and press. No tools, no drilling, no wiring.

Do these affect my fog light output?

No. The overlays sit on the housing surround, not on the lens itself. Your actual light beam and output are completely unaffected. You keep full fog light functionality after install.