Post Milton - Shipping Resuming

StickerFab

$9.99 USD

Earn [points_amount] when you buy this item.

  • Makes wet installs of vinyl products MUCH easier
  • 1x 50ml spray bottle of StickerFab Application Fluid
  • 1x felt lined squeegee
  • 1x Chemical Guys microfiber towel
Shipping and processing notes.

StickerFab Essential Vinyl Installation Pack (w/ Chemical Guys Microfiber)

These are a combination of the most essential and commonly used items for installing vinyl.  You will be doing yourself a disservice by not having these items around when performing a wet installation.

Includes:

  • 1x 50ml spray bottle of StickerFab Application Fluid
  • 1x felt lined squeegee
  • 1x Chemical Guys microfiber towel

Take a moment to read up on all these items:


Application Fluid (50ml)

This is the application fluid you were looking for.  Better than any mixture of soapy water, it allows for easier installations in a slightly wider range of temperatures.

It turns novices into at least intermediate level installers.  The initial surface tension of the sticky vinyl gets broken so you can dial in your alignment.  Push the fluid out and you are left with a spot on install.

Non-flammable.

INSTRUCTIONS

Shake before use.  Use in the shade if it is sunny and warm.

We recommend you clean the installation area with this application fluid OR a detail spray that doesn't have wax and THEN this application fluid if the area is really dirty.  Use a microfiber cloth to wipe dry.  Spray the back of your vinyl and then proceed like we instruct you in many of our installation videos.  Align, install, and squeegee or push out the remaining application fluid from under the vinyl.  Allow to dry.  Use of LIGHT heat can accelerate the initial bonding period.

If used with transfer tape, be sure the vinyl is dry enough to peel back the transfer tape without removing the vinyl (2-3 minutes after pushing as much application fluid out as possible).


Felt Lined Squegee

This felt lined squeegee aids in protecting vinyl while allowing you to place firm, even pressure.

These characteristics make it ideal for larger vinyl pieces. Aids in preventing bubbles from getting trapped between vinyl and application area.

Soft edge aids in preventing damage to vinyl.


Chemical Guys Professional Grade Premium Silk Banded Microfiber Towel

Use This Microfiber Towel To:

Perfect for final-touch buffing & wiping
Have lint free & scratch free results
Silk edges further reduce scratches
Prevent scratching and swirling
Clean up life's messes and spills quickly
Dry down that fuzzy pup after a bath or playing in the yard

How To Wash Microfiber Towels:

1. Separate microfiber towels by type into designated wash & dry loads
2. Machine wash microfiber goods with Chemical Guys Microfiber Wash and HOT water
3. Add 1 ounce for small wash loads; 2 ounces for medium loads; or 3 or more for large wash loads
4. Machine dry microfiber goods on LOW heat

Do NOT use fabric softeners or dryer sheets.

Don't settle when it comes to your ride, look for the Chemical Guys branded silk edges to protect your paint.

Customer Reviews

Based on 11 reviews
64%
(7)
18%
(2)
0%
(0)
0%
(0)
18%
(2)
K
Keith Kazmier (Elk Grove Village, IL, US)
Doesn't fit correctly

The item didn't fit correctly. Furthermore, the demonstration video uses a Ford Bronco which conveniently doesn't have a door frame on top of the window giving the elusion its much easier than reality. Would not order again.

D
DDelcampo (Winter Park, FL, US)
Worth it

Made the installation super easy and quick. Thank you.

Thank you!

J
James Stalker (Grand Terrace, CA, US)
Didn’t work out as planned

After installing it have some streaks that wouldn’t go away. I used the installation kit sold by you and cleaned the window several times. Maybe it was too hot outside but I did install it in the shade. I like what you guys are doing with all the other stuff you sell but this didn’t work out as planned. I removed it and scheduled an appointment for a professional install.

P
Patrick Spangenberg (Marinette, WI, US)
Outstanding

The decals are great quality and easy to put on with the kit, and they look great too. Highly recommend! Thank you!

D
Dennis Gorsett (Montrose, CO, US)
Kit made the install easy

I purchased install kit with my dash sticker because I am not good at this kind of thing and needed all the help I can get. I suppose you could put the kit together yourself, but it was nice having it together. The squeegee with the soft edge was particularily helpful.

J
Joe (Boardman, OR, US)
Material

I already had fiber towels. Mix a little soap with water in a spray bottle. What I needed was the flat piece with the cloth on it to squeeze the decal flat without scratching it. That came in handy. I used them all and it worked out fine.

M
Mikayla Pollard (Atlanta, GA, US)
Much better!

These covers for the visors are a perfect added touch to cover those eyesore warning labels! They were easy to apply and seem to be holding up well so far!

S
S. T. L. (Atlanta, GA, US)
21 Bronco Window Tint- 2 door

Tint was as advertised. Fairly easy to install but I did need more liquid than what came with kit to apply tint. Used a J&J Baby shampoo and water mixture and it worked fine. Be careful that your application area is shielded from wind and dust.