2021+ Bronco Topo Glovebox Overlay Kit (Printed Series)
We're starting to theme the interior of our Bronco. The plain soft plastics provide a blank canvas that you can protect and style.
It's easy to install this overlay and it can cover up minor imperfections and discolorations on the glove box.
Fits ALL 2021+ Broncos. Matte finish.
Designs
- Generic Topo - a nice topological map style design
- Badlands - actual location in Badlands National Park based on USGS maps
- Bronco Knoll - the area including the coordinates marked on every Bronco. 34.5261 N, 116.75685 W.
Customization
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
- Military Themed
- Patriotic
- Other organizations
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
INSTALLATION
Use the installation video above and written instructions to complete the install. NOTE: All topo vinyls are shipped in tubes to prevent damage. Prior to install, lay out all of these items and make sure they are flat prior to install.
NOTE: Removing the glove box is simple. Empty glove box, open and push the tabs in at the end. The guide arm on the right side should come out of it's hole. Move to a low position where the hinge at the bottom will allow for removal. Reverse to re-install.
You will want to do this in 75-85 degree weather ideally. Stay in the shade unless it is a little on the cool side.
Recommended items:
- This Kit
- Detailer spray to prep the area (without wax)
- Alcohol wipe
- Optional Heat gun or hair dryer
- Optional 3M promoter pen
Make sure the surface is clean. Prep with alcohol pad if needed. Use a dry install. Align pieces and press down firmly. Work slow to prevent creasing.
The adhesive reacts to PRESSSURE and HEAT.
Customer Reviews
Kid beat the glove box up with his school bags, these cover it up and went on way easier than I expected
While it's hard to see on a normal drive. Anyone entering for the passenger side with any amount of light is immediately stunned. Looks incredible. For install, make sure you peel from the right! If you peel from the left, there is a pressure point by the handle cutout that will quickly tear. Also, with this one you can't get away without heat. Make sure you have a hairdryer or heat gun on hand as you'll really need to baby it around the upper right side. Overall, awesome, only 1 star less because there is really no way to get away without that slight crease on the upper right side.
The plastic on these Bronco glove boxes don’t take much to scratch up so I thought this was a good opportunity buy this inexpensive product. I’m not a person who has patients with vinyl so I was a little hesitant at first but I just took my time and it made it easier that the vinyl was forgiving and as long you don’t press down hard or heat before you line it up. I will be honest though and Chris from StickerFab does mentioned it in his install video, that too right corner, you do have to play with it a little and use just a little heat to adjust and readjust and I did the same as Chris and overlapped where the cutout is. One more small piece of advice, it was easier to install if you remove the glove box from the vehicle. Looks nice IMO and serves a purpose.
