FOX 2.5 Performance Elite - Built for the Full-Size Bronco
Race-bred damping, external-reservoir cooling, and on-the-fly DSC adjustment - engineered specifically for the 4-Door Ford Bronco.
⚠ Choose your setup. Use the Position option to select Front (883-06-212), Rear (883-06-213), or the Front & Rear complete set. The front shocks require an upper control arm (UCA) and deliver 4-4.5" of lift; the rear shocks deliver 2-2.5" of lift.
DSC Reservoir Adjustment
The Performance Elite Series adds FOX's Dual Speed Compression (DSC) adjuster on the external reservoir. Independently tune high-speed and low-speed compression to dial in ride comfort on the highway and control over rough trail - no disassembly, no revalve, just turn the knob.
Race-Grade Construction
A 2.5" impact-extruded, CNC-machined 6061-T6 hard-anodized aluminum body sheds heat far faster than steel and shrugs off rust. The external reservoir separates oil and nitrogen to fight fade on long, hot descents. Black-anodized billet components, 7/8" hard-chrome shafts, and a redundant multi-seal pack keep it sealed and consistent.
Specifications
| Spec |
Front (883-06-212) |
Rear (883-06-213) |
| Series |
2.5 Performance Elite (DSC reservoir) |
| Lift Height |
4-4.5" |
2-2.5" |
| Travel |
5.47" |
7.97" |
| Extended Length |
23.41" |
26.41" |
| Compressed Length |
17.94" |
18.44" |
| Body |
2.5" CNC-machined 6061-T6 hard-anodized aluminum |
| Shaft |
7/8" hard-chrome plated steel |
| Bearings |
PTFE-lined, heat-treated alloy-steel spherical |
| Mounts |
Top: OEM · Bottom: bar pin |
Installation Notes
Front shocks require an upper control arm (UCA) for proper geometry at 4-4.5" of lift. A maximum 4.5" wheel backspacing is required to properly clearance suspension components. Professional installation and an alignment are recommended. These are performance off-road shocks - torque all hardware to FOX/OEM spec.
Fitment
Fits 2021-2026 Ford Bronco, non-Raptor. Excludes the Raptor submodel and base models with the Sasquatch package (Sasquatch requires a different lift-specific application). Verify your build against the FOX application guide before ordering.
FAQ
What's the difference between the Front and Rear options?
The Front (883-06-212) is a coil-over that requires an upper control arm and gives 4-4.5" of lift. The Rear (883-06-213) gives 2-2.5" of lift. Choose the complete Front & Rear set for the full matched setup.
Do I need upper control arms?
Yes - the front coil-overs require a UCA to correct suspension geometry at this lift height.
What is DSC?
Dual Speed Compression - a reservoir-mounted adjuster that lets you independently tune high-speed and low-speed compression damping without revalving the shock.
Will these fit my Sasquatch or Raptor?
No - Raptor is excluded, and Sasquatch-package models require a different lift-specific FOX application. This listing fits non-Sasquatch, non-Raptor 2/4-Door Broncos.
