Fitment: 2024+ INEOS Grenadier — OEM US-spec front bumper only.
⚠ US models only. These inserts are cut to the shape of the US-spec bumper step and will not fit other-market bumper shapes.
Front Bumper Step Pad Overlay Inserts — 2024+ INEOS Grenadier
Step Up. Protect Your Finish.
A clean, functional upgrade for your 2024+ INEOS Grenadier. These matte black acrylic step pad inserts give you a secure place to step onto your front bumper — so you can reach the hood, windshield, or roof rack without scuffing, scratching, or wearing down the factory finish underneath.
Grippy, OEM-Look Finish
Precision-cut from matte black acrylic with an engineered tread pattern for confident footing. Understated and purpose-built — it looks like it belongs there from the factory.
Sold as a Pair
Each set includes driver and passenger side inserts, cut to match the US-spec bumper steps for a symmetrical, factory-integrated look.
Features
-
Finish: Matte black acrylic — subtle, OEM-look
-
Sold as a pair — driver and passenger side
-
Protects your finish: step up confidently without damaging the paint or bumper cap
-
Pre-applied 3M™ 468MP adhesive transfer tape — professional-grade, weather-resistant bond
-
Easy to install and easy to replace if ever needed
- Made in the USA
What's Included
- (2) Matte black acrylic step pad inserts (driver + passenger side)
- Pre-applied 3M™ 468MP adhesive — no extra tape needed
Installation Instructions
These inserts come with 3M™ 468MP adhesive transfer tape pre-applied. For the strongest, longest-lasting bond, follow these steps:
-
Work at 70°F (21°C) or warmer. Install and keep the vehicle at this temperature — bonding is dramatically slower below 50°F. Warmer surfaces (up to ~80+°F) speed up the bond.
-
Clean the bumper step surface thoroughly with isopropyl alcohol. Remove all dirt, wax, oil, and residue, then let it fully dry. A clean surface is critical — any residue will weaken the final bond.
-
Dry-fit first. Set each insert in place to confirm alignment before removing the adhesive liner. The 468MP is briefly repositionable on first touch, but plan your placement.
-
Peel the liner and apply. Position carefully, then press firmly. Use a roller or firm hand pressure across the entire pad — high pressure forces the adhesive to fully "wet out" and bond to the surface.
-
Let it cure. The bond reaches ~50% strength in 20 minutes, ~90% in 24 hours, and full ultimate strength in 72 hours at room temperature. Avoid heavy stepping/loading for the first 24 hours and don't wash or expose to water for at least 24-48 hours.
Built for the Elements
Once fully cured, the tread and permanent-grade 3M bond hold up to real-world weather — rain, mud, and daily use — so you always have sure footing when you step up.
Frequently Asked Questions
Will these fit my Grenadier?
They fit the 2024+ INEOS Grenadier OEM US-spec front bumper. They are shaped for the US-market bumper and will not fit other-market bumper shapes.
Do I need any extra adhesive or hardware?
No — 3M™ 468MP adhesive is pre-applied. You just need isopropyl alcohol to prep the surface.
Can they be removed or replaced?
Yes. They're easy to replace if ever needed, though the 468MP forms a strong permanent-grade bond once fully cured. Just heat and pull with your fingers or a trim piece tool with a soft cover (ie felt).
Will they damage my bumper?
No — that's the point. They protect the factory finish from scuffs and wear when you step on the bumper.
Made in the USA by StickerFab.
