2011 2012 2013 2014 Subaru WRX / STI Vinyl Fender Vent Overlay
If you want to make your WRX stick out a little bit more vs a stock WRX, this is an affordable way to add some style. They are really easy to install! These install over the painted fender vent portion below the WRX or STI logo. This makes the fender vent stick out a little more.
SOLD AS A SET. Only 1 set required per vehicle. Does not include fender emblems.
Choose LOWER only or UPPER and LOWER. Created from US sourced materials.
Please follow these guidelines for the best results. Clean the painted surface of the fender vent. Apply water or a soapy mix of water to this area and the vinyl. This allows you to move the product around and position it correctly without it bunching up due to the adhesive. Once it is positioned, use your finger to press the vinyl down. I do not recommend using a squeegee. They are abrasive and can damage the vinyl. You can press the water out simply with your fingers.
NOTE: Using heat, like a heat gun or hair dryer helps the adhesive bond and can stretch the product if needed to fill in gaps when positioning. When using heat, start low and learn how the heat affects the vinyl. My rule of thumb is that if you wouldn't heat your fingers to that temperature, you might want to think twice about heating the vinyl to it! Thank you for looking at my listing.
If you are rocking the 08-14 WRX this mod is a must, simple change yet give the lines of the car so much more of an aggressive look.