Ford Bronco Cursive Script Metal Emblem Templates - 2021+ Bronco
$13.99 USD
Earn 69 Points when you buy this item.
- Install kit is the only thing available now, please read below for more information
Earn 69 Points when you buy this item.
NOTE: We are now only offering the template. Unfortunately we do not have the personnel to de-pin all these emblems.
They can be purchased directly from the manufacturer here: https://www.dennis-carpenter.com/product_search/?globalfilter%5Bcustom1%5D=&globalfilter%5Bcustom2%5D=&globalfilter%5Bcustom4%5D=&q=c6tz-16098
These Ford licensed products are made to the original Bronco specs. We have modified them to fit the 2021+ Bronco without drilling. This makes installation a breeze and your vehicle equipped with the highest quality products emblems available.
These were designed for the original Bronco which uses locator pins on the fender. As most owners do not want to drill holes in their newer Bronco, we have carefully removed these pins so you don't have to.
Dimensions: Approximately 10.5 inches wide and 2.25 inches tall. They outsize the 6th Gen Heritage badges by 1.5 inches!
NOTE: Originally designed for 1966 Broncos. We have modified a licensed product from it's original form to make it EASIER to install on a flat surface. In its original, licensed form, it is not intended to mount on a 6th generation Bronco without modification (either pin removal, or drilling of your fender).
NOTE: The adhesive is VERY sticky so make sure to test fit and double check your placement before removing the adhesive backing. Make sure the emblem is not bowed out. Also make sure the emblem is straight. While removing pins and transit the emblems can lose their alignment, but are easily to mold back to original position. View your template. The letters are not all the same size, but the proper alignment is described in the template.
Most vehicles have a rake to them. Find an alignment you are pleased with. Then you must base your installation off of your own reference. Mock up your install before installing. No warranty is available for your alignment issues so please triple check before finalizing install.
This usually happens on the passenger side. If the emblem matches the mounting surface when test fit, it will adhere properly with no separation. Do not use force during test fitting to make it fit. If you notice any gap when test fitting, STOP and bend the emblem gently to match the surfaces. Then re-test.
75-85 degree weather (not heated garage) recommended. Maintain 70+ degrees for first 24 hours.
NOTE: 3M Promoter has been removed from the setup. It was causing the adhesive to create a stronger bond to the paint than the vehicle. (6/13/2023)
Notice of Non-Affiliation and Disclaimer: StickerFab is not sponsored by, affiliated with, endorsed by, or otherwise associated with Ford Motor Company, Ford Performance, or their affiliates.
At first I was in love with them but after about a year and half the powder coating faded from black to grey and now is missing in spots.
I spent a considerable amount of time, gently trying to get these to lay flush on both fenders, before applying. They almost seemed like they had a mild twist to them out of the packaging. Neither fender aligned properly with the emblem, no matter what I did. And yes, I know what I am doing. Watched the video and have applied plenty of emblems to vehicle in my lifetime. Also have metal shaping experience. Grew up in my grandfathers body shop and have done it all, painted, done vehicle wraps before. I would prefer a smaller option than these massive things honestly. I’m glad it’s working for some of you. But I’m going to run my fenders naked for a while, until I decide what I want to do there.
I’m thrilled with this purchased. Easy to follow installation instructions and the script looks fantastic. I’m so happy I decided to go for it. I waivered back and forth for months and decided to order. No regrets!
Didn't receive adhesive promoter but got everything else. Looks good and good templates.
Ford Licensed Bronco Cursive Script Metal Emblem Kit (Modified) - 2021+ Bronco
I purchased this one and a cheaper one on Amazon. I compared them both and this metal one was way better. The Amazon one was plastic and the font just looked a little off. Yes this one was a little more but you own a Bronco, not a Corolla!
I added to my ‘23 Bronco to replace the factory stickers. These are made from metal and much more sturdy than some of the plastic versions out there.
Great price for a great product
Ford Licensed Bronco Cursive Script Metal Emblem Kit (Modified) - 2021+ Bronco
