Porsche "GTS" Door Vinyl Emblems
These door vinyls add a subtle reminder or what trim level your vehicle is. A touch of style to the side of your ride.
Comes with a pair of decals with pre-attached transfer paper. The transfer paper holds the alignment of the individual letters and makes it easy to install. Also included are 1 inch side strips of alignment vinyl to aide in installation.
INSTRUCTIONS
Ideally you want to install these out of direct sunlight. Warm environments of over 70 degrees are great, however direct sunlight and over 80 degrees can affect the vinyl. It makes it very soft.
Clean the application area and make sure it is free of dust, debris, wax, etc. Place the alignment strips along the bottom and side of the door. Carefully use the application paper to remove one decal. Apply it slight above and to the side of the alignment strips. Remove the alignment strips. Before removing the transfer paper, make sure to press all the letters down firmly. Then remove the transfer paper.
- Microfiber
- Detailing Spray
- Soapy Water
- Heat Gun or Hair Dryer
I ordered one for a cayenne and it looks amazing
"GTS" Door Vinyl Logo Emblems for Porsche Vehicles (Boxter, Cayman, 911, Macan, Cayenne, Panamera)
Worked very well
Took less than 5 minutes to put both driver and passenger side stickers on my 911 GTS. Seemingly good quality.
Perfect.
1) Place painters masking tape under original
2) Warm up originals with hair dryer and remove.
3) Warm up new decals and adhere in position.
4) Stand back and admire 👌
I bought this to go over the matte black GTS decal on my black Cayman and make things more visible with a red GTS decal. The quality seems good, but I haven’t installed it yet because it’s not the same size as the factory decal. I was hoping to just cover it, but there will be factory decal sticking out. Not sure what I’m going to do with it right now.
A quality product .
Thank you so much.
Easy to apply, looks great.