Printed Series Auxiliary / Upfitter Switch Labels
The convenience of the auxiliary switches in the Ford Bronco is relatively unquestioned. They are labeled Aux 1-6, but unless you have memorized each location, you might forget a switch or two. Asking someone else to turn something else on for you? Well forget about it unless you start labeling.
We're giving you a variety of options from normal to photoluminescent (glow in the dark). Laminated or not.
The inks are rated for 3 years of outdoor use, but in this application they are mounted inside and are generally protected from UV exposure.
UPDATE (1/22/22): The lamination adds 2.5 mil thickness and protects the printed surface. This can further increase the durability. Adds 4 years of outdoor durability, but again this is in a generally protected area.
UPDATE (3/29/22): Current V3 version is in first photo. This is what is currently shipping to customers.
UPDATE (4/03/23): Some silly labels removed and swapped out with ones like front and rear locker. Non-laminated styles removed. Both to delivery only the higher quality, thicker ones, and also to streamline fulfillment.
NOTE: Photoluminescent paper needs to be charged with a bright light source for 5-10 minutes to sustain its glowing appearance. Shining a light on it briefly will result in light, but that light will be relatively brief (minutes).
Last but not least, thank you Sean (Natai on Bronco6G) for these awesome designs. Without you this wouldn't have happened.
INSTALLATION
Clean the application area to prepare it for installation. We'll be doing a dry installation.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
- Microfiber
- Detailing Spray
- Heat Gun or Hair Dryer
Keep a hair dryer around if you want to apply light heat to dry it out once properly aligned. Otherwise you can park it back in the sun and push down the corners. Please make sure all the letters are dry before driving the vehicle.
Applications
2021+ Ford Bronco
2021+ Ford F-150 Tremor
2021+ Ford Raptor
2021+ Ford Ranger Tremor
They’re easy to put on and look like they were made that way!!! There’s so many to choose from in the pack- it was hard deciding which fun ones to put on those auxiliary switches.
Stickers arrived quickly and were of high quality - customer service is out of this world!
Thank you
decals are fun with lots of choices but they don't stick very well to the rubberized switches. suggest 3M primer or a different location.
Quality stickers with plenty of labels for anything you can think of. A perfect fit for the Aux switches.
Love them
As advertised and look good on switches
The stickers are okay in quality. But look a bit tacky once applied. Easy to apply and adjust to level.
For those unable to go to the next step of enhancing your bronco these work. Stickerfab should provide a version for those take the switch labeling one step further.
