Tone Down the Grenadier’s Airbag Light
A simple dark smoke tint that makes the overhead airbag indicator a little easier on the eyes at night.
Too Bright After Dark?
The passenger airbag indicator above the rear view mirror on the INEOS Grenadier glows bright orange, and plenty of owners find it distracting on night drives. It sits right in your line of sight.
This film is the easy fix. A thin layer of dark smoke tint softens the glow so it stops competing with the road.
|
 |
 |
Stealth Dark Smoke LX Film
This film is made from stealth dark smoke LX material. It takes the brightness down a notch without hiding the light, so you can still see the airbag status at a glance.
Built-in air egress channels let trapped air work its way out, so the film lays down smooth with no bubbles.
|
Good to know: this tint is designed to make the airbag indicator a little less bright, not to hide it. The light remains visible, and it should stay that way. Apply it only over the indicator and don’t stack extra layers.
Watch the Install
Before You Install: Get the Temperature Right
The video shows a dry install, but a wet install works too. Either way, install with your vehicle at a comfortable 70–74°F. Run the A/C to cool the cabin, or the heat to warm it slightly.
That temperature range keeps the film easy to position and helps it settle smooth, without fighting you as it warms or cools.
What’s in the Kit
- 2 pieces of dark smoke airbag light tint film (1 to install, 1 spare)
- Air egress channels for easy, bubble-free install
This Fits
| Make |
Model |
Year |
Location |
| INEOS |
Grenadier |
2024+ |
Passenger airbag indicator above the rear view mirror |
Frequently Asked Questions
|
Will I still be able to see the airbag light?
Yes. The film is designed to make the light a little less bright, not to hide it. It stays visible, just softer.
|
Dry install or wet install?
Either. The video shows a dry install, and a wet install works too. Keep the cabin at 70–74°F for the best result.
|
|
What are the air egress channels?
They are tiny channels in the film’s adhesive that let trapped air escape as you press it down, so you get a smooth finish without bubbles.
|
How many pieces do I get?
Two with every order. One to install and one backup, in case you want another try.
|
|
Will it fit my Grenadier?
It is made for the passenger airbag indicator above the rear view mirror on the 2024+ INEOS Grenadier.
|
What if I want to remove it?
Peel it off slowly. If you need a fresh piece, the spare in your kit is there for that.
|
|
What about returns?
We offer 30-day returns. Email info@stickerfab.com and we will take care of you.
|
|
