Overlays for the Trail Sights
You ask. We listened. Multiple inquiries came through for these overlays. We're not the only ones that wanted to overlay our trail sights, but your demand pushed it to the top of the list.
Ships with 2 full sets of overlays. You only need to use one, but we don't like our customers to be stranded without a backup. I found out that each time I installed the overlays using a dry method, it wound up in a slightly different place. If you don't like the alignment, start over with a new one.
NOTE: Badlands Orange is the closest vinyl color we could find to the interior of the Badlands. In certain light it looks very similar. In darker light it looks a little lighter, but is much closer than a standard orange. Badlands Grey is close to the dash color. Please see photos.
For close to paint matched colors, please check out our printed series overlays. Optionally you can have the factory "Max Load 150lbs" text.
INSTALLATION
Clean the application area and apply the vinyl using a DRY installation. Make sure the area is clean and free of dust, debris, dirt, wax, etc.
85 degree install WEATHER without high humidity is the best environment.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Make sure the installation area is completely dry before attempting an install. Cleaning agents take surprisingly long amounts of time to dry when it is humid.
When really hot try doing the install in the shade so it doesn't heat up the vinyl rapidly. Perform a dry install.
Low heat is recommended for maximum bonding with a dry installation as well. Note that every spot we installed these on had slightly different alignment. Initial alignment will result in various final alignment. On our vehicle the bolts were not all centered on the bolt hole.
After installed, the next few times you visit your vehicle, be sure to press the vinyl down firmly. This will help it to develop a strong bond.